|
|
|
Tactical Multi-Mount Sight System
Fits Scopes and Electronic Dot Sights
Handguns or Long Guns
Easy On / Off with Repeatability
30 mm
Optional 1" Inserts
Fits both Picatinny or Weaver Rails (Both Bars are Included)
Tension Adjustable for Rail Width
Build in Height for Co-Witnessing Iron Sights (AR-15 Rifles with Aimpoint Scope))
Mil-Spec Finish
|
|
|
|
|
|
|
Arms # 40 Flip Up A2 Rear Sight
The A.R.M.S.®® Stand Alone Flip-up sight, utilizes the same well proven concept as the rear sight on the SWAN® Sleeve system. The unique design of the spring loaded rear sight, ensures constant battery action and repeat zero. The sight is held in the locked down position by a quick release lever, that prevents the sight from being accidentally engaged, but is as fast as a trigger to release even with arctic mittens. The initial elevation zero utilizes the standard M16/M4 front sight bead. When the sight is released into battery the 250-300 meter aperature is ready for immediate close combat use. For longer ranges the leaf sight aperature is rotated to access the 500-600capability with the built in horizon line feature that helps lead distant targets and lets the shooter square the rifle to counter windage offsets, if the rifle is inadvertently tilted.
|
|
|
|
|
|
|
Arms Aimpoint Comp Ring
Through lever 30mm mounting system guaranted repeatability.
|
|
|
|
|
|
|
Full Spacer for #22M68 Ring Mount
To be used with the #22M68 Ring Mount to co-witness the front sight post.
1/2" height
|
|
|
|
|
|
|
Arms 22M68 Extension
Cantilever Extension Ring. Moves the Aimpoint more forward over the handguards. Co-witness with the front sight post.
1/2" Height
|
|
|
|
|
|
|
Quick Release Mount- Picatinny and Weaver Style
Quick Release mount for Picatinny or Weaver bases. Used on A3 Flat Top Upper Receivers. Return to zero mounting system. Choose style of rail mount below.
|
|
|
|
|
|
|
Spacer for QRW or QRP
To be used with either QRW or QRP ring mount to raise the dot to co-witness the front sight post on A3 Flat Top Uppers.
|
|
|
|
|
|
|
M16 Forward Mount
Attaches to A2 Upper and mounts scope over the Handguard. To be used in conjuction with QRW or QRP ring mount. Spacer also used to put dot above the front sight post.
|
|
|
|
|
|
|
CCW Dual Level Optic Mount
Picatinny Rails on both upper and lower mounting surfaces. Will clear both Standard and M4 Handguards. Supplied with 2 each Accessory Rails for mounting various attachments. When used with standard height 30mm ring both Aimpoint Dot and Iron sights are viewable.
|
|
|
|
|
|
|
Aimpoint 30mm Ring X-wide
Weaver or Picatinny Mount. 1/4'' high from the top of the base to the bottom of the scope. Choose rail mount below.
|
|
|
|
|
|
|
Aimpoint 30mm Ring X-Wide, X-High
Weaver or Picatinny Mount. 7/16'' from the top of the base to the bottom of the scope. Choose rail style below.
|
|
|
|
|
|
|
Killflash ARD
To be used with CompC, ML2 or M2 sights. Reduces glare and filters the sun.
|
|
|
|
|
|
|
Double Battery Module (M Series)
Sleeve, Cap & Strap for CompM2, CompML2, CompM & XD. Stores and extra battery.
|
|
|
|
|
|
|
Double Battery Module
Cap and Sleeve for Aimpoint Models: 7000 and CompC. Double Battery Module. Stores extra battery.
|
|
|
|
|
|
|
Aimpoint Lens Covers
Flip-up Caps for Aimpoint Scopes. Select model below.
|
|
|
|
|
|
|
Aimpoint Battery
Fits all current Aimpoint Models. DL 1/3N, 3V Lithium Battery.
|
|
|
|
